The post AIS 140 – 4G appeared first on iTrack.

There are several generations of OBD systems, with OBD-II being the most widely used and standardized system. OBD-II was introduced in the mid-1990s and is now mandated by law in many countries, including the United States. It uses standardized diagnostic trouble codes (DTCs) to indicate specific issues or malfunctions. These codes can be read by diagnostic tools or scanners, enabling technicians to pinpoint the problem areas.

CAN (Controller Area Network): CAN is a communication protocol that allows various electronic control units (ECUs) within a vehicle to exchange information with each other. It was developed in the 1980s by Bosch and has become the de facto standard for in-vehicle communication. CAN enables high-speed, reliable, and efficient data transfer between different systems and components, such as the engine, transmission, ABS (Anti-lock Braking System), airbags, and more.

CAN bus allows for simultaneous communication between multiple ECUs over a single two-wire network. It utilizes a differential signaling method, where the voltage difference between the two wires indicates the transmitted information. This allows for robust noise immunity and efficient utilization of the network bandwidth.

OBD-II and CAN Integration: In modern vehicles, OBD-II and CAN are closely integrated. The OBD-II system uses the CAN protocol as the communication backbone to gather diagnostic information from various ECUs and sensors. This integration enables standardized access to vehicle data, making it easier for technicians and diagnostic tools to communicate with the vehicle's computer system.

Using the OBD-II port, which is typically located under the dashboard, diagnostic tools or scanners can establish a connection to the vehicle's CAN bus. They can then retrieve diagnostic trouble codes, read live sensor data, and perform various diagnostic functions. This allows for efficient troubleshooting, maintenance, and repair procedures.

Moreover, the integration of OBD-II and CAN has also facilitated the development of advanced vehicle telematics systems. These systems can utilize the OBD-II port and the vehicle's CAN bus to gather real-time data about vehicle performance, fuel consumption, driving behavior, and more. This data can be used for fleet management, insurance purposes, vehicle tracking, and other applications.

The post OBD CAN with GPS appeared first on iTrack.

Here are some key features and benefits of 2G vehicle trackers:

1. Real-Time Tracking: 2G vehicle trackers provide real-time tracking capabilities, allowing you to monitor the location of your vehicles at any given moment. This information is typically accessed through a web-based platform or a mobile application.
2. Location Accuracy: With the integration of GPS (Global Positioning System) technology, 2G trackers can determine the precise geographical coordinates of the vehicle. This allows for accurate and reliable tracking, ensuring you can monitor the movement of your vehicles with precision.
3. Geo-Fencing: Many 2G vehicle trackers support geo-fencing functionality. Geo-fencing enables you to create virtual boundaries or zones on a map, and you receive alerts if the tracked vehicle enters or exits these predefined areas. This feature is useful for fleet management, security purposes, and ensuring compliance with designated routes.
4. Remote Monitoring: 2G vehicle trackers often come with additional features that enable remote monitoring of various aspects of the vehicle. These can include monitoring fuel levels, engine status, vehicle speed, and more. By remotely accessing this information, you can stay informed about the condition and performance of your vehicles.
5. Historical Tracking Data: Along with real-time tracking, 2G vehicle trackers typically store historical tracking data. This allows you to review past routes, locations, and behaviors, which can be valuable for analysis, performance evaluation, and improving operational efficiency.
6. Cost-Effective Solution: As 2G technology is older and less in demand, 2G vehicle trackers tend to be more affordable compared to trackers utilizing newer network technologies. This can be advantageous for businesses or individuals looking for cost-effective tracking solutions.

It's worth noting that 2G networks are being phased out in some regions as telecommunication companies transition to more advanced technologies like 3G, 4G, and 5G. If the 2G network is being deprecated in your area, you may need to consider upgrading to a tracker that supports newer network technologies to ensure continuous tracking capabilities.

In conclusion, a 2G vehicle tracker offers real-time tracking, accurate location data, and various features that contribute to effective vehicle monitoring and management. While 2G technology is older, it still provides a reliable tracking solution in areas where 2G coverage is available. It is important to check the network compatibility and coverage in your specific region to ensure the optimal performance of the tracker.

The post 2G Tracker Slim appeared first on iTrack.

Here are some key features and benefits of 2G vehicle trackers:

1. Real-Time Tracking: 2G vehicle trackers provide real-time tracking capabilities, allowing you to monitor the location of your vehicles at any given moment. This information is typically accessed through a web-based platform or a mobile application.
2. Location Accuracy: With the integration of GPS (Global Positioning System) technology, 2G trackers can determine the precise geographical coordinates of the vehicle. This allows for accurate and reliable tracking, ensuring you can monitor the movement of your vehicles with precision.
3. Geo-Fencing: Many 2G vehicle trackers support geo-fencing functionality. Geo-fencing enables you to create virtual boundaries or zones on a map, and you receive alerts if the tracked vehicle enters or exits these predefined areas. This feature is useful for fleet management, security purposes, and ensuring compliance with designated routes.
4. Remote Monitoring: 2G vehicle trackers often come with additional features that enable remote monitoring of various aspects of the vehicle. These can include monitoring fuel levels, engine status, vehicle speed, and more. By remotely accessing this information, you can stay informed about the condition and performance of your vehicles.
5. Historical Tracking Data: Along with real-time tracking, 2G vehicle trackers typically store historical tracking data. This allows you to review past routes, locations, and behaviors, which can be valuable for analysis, performance evaluation, and improving operational efficiency.
6. Cost-Effective Solution: As 2G technology is older and less in demand, 2G vehicle trackers tend to be more affordable compared to trackers utilizing newer network technologies. This can be advantageous for businesses or individuals looking for cost-effective tracking solutions.

It's worth noting that 2G networks are being phased out in some regions as telecommunication companies transition to more advanced technologies like 3G, 4G, and 5G. If the 2G network is being deprecated in your area, you may need to consider upgrading to a tracker that supports newer network technologies to ensure continuous tracking capabilities.

In conclusion, a 2G vehicle tracker offers real-time tracking, accurate location data, and various features that contribute to effective vehicle monitoring and management. While 2G technology is older, it still provides a reliable tracking solution in areas where 2G coverage is available. It is important to check the network compatibility and coverage in your specific region to ensure the optimal performance of the tracker.

The post 2G Tracker Regular appeared first on iTrack.

Here are some key features and benefits of a 2G vehicle tracker with a magnetic body:

1. Magnetic Mounting: The magnetic body of the tracker allows for quick and effortless installation on metallic surfaces, such as the body of a vehicle. The strong magnets securely hold the tracker in place, eliminating the need for screws, brackets, or other mounting hardware. This makes it convenient to attach and detach the tracker as needed.
2. Real-Time Tracking: Like any other 2G vehicle tracker, the tracker with a magnetic body provides real-time tracking capabilities. It enables you to monitor the location and movement of your vehicles or assets in real-time, providing you with up-to-date information about their whereabouts.
3. Location Accuracy: With the integration of GPS technology, the 2G vehicle tracker can accurately determine the precise geographical coordinates of the vehicle or asset. This ensures accurate and reliable tracking data, allowing you to monitor their location with precision.
4. Geo-Fencing: Many 2G vehicle trackers with a magnetic body support geo-fencing functionality. This enables you to set up virtual boundaries or zones on a map and receive alerts if the tracked vehicle or asset enters or exits these predefined areas. Geo-fencing is useful for managing vehicle or asset movement, enhancing security, and ensuring compliance with designated areas.
5. Easy Portability: The magnetic mounting system allows you to easily move the tracker between different vehicles or assets as needed. This makes it ideal for applications where tracking requirements may change frequently or where temporary tracking is necessary.
6. Quick Installation and Removal: The magnetic body of the tracker simplifies the installation process. You can attach the tracker to a suitable metal surface within seconds, and removing it is just as easy. This saves time and effort compared to traditional installation methods.
7. Compact and Discreet Design: 2G vehicle trackers with a magnetic body are typically compact and discreet, making them less noticeable when installed on a vehicle or asset. This can be advantageous for applications where covert tracking or minimal visual impact is desired.

It is important to note that 2G networks are being phased out in some regions, and the availability of 2G coverage may vary. Before purchasing a 2G vehicle tracker, ensure that 2G network coverage is available in your area to ensure the tracker's functionality.

In summary, a 2G vehicle tracker with a magnetic body offers real-time tracking capabilities, accurate location data, and the convenience of quick and easy installation. The magnetic mounting system allows for flexibility and portability, making it suitable for temporary tracking or situations where permanent installation is not feasible.

The post Magnet – B appeared first on iTrack.

Here are some key features and benefits of a 2G vehicle tracker with a magnetic body:

1. Magnetic Mounting: The magnetic body of the tracker allows for quick and effortless installation on metallic surfaces, such as the body of a vehicle. The strong magnets securely hold the tracker in place, eliminating the need for screws, brackets, or other mounting hardware. This makes it convenient to attach and detach the tracker as needed.
2. Real-Time Tracking: Like any other 2G vehicle tracker, the tracker with a magnetic body provides real-time tracking capabilities. It enables you to monitor the location and movement of your vehicles or assets in real-time, providing you with up-to-date information about their whereabouts.
3. Location Accuracy: With the integration of GPS technology, the 2G vehicle tracker can accurately determine the precise geographical coordinates of the vehicle or asset. This ensures accurate and reliable tracking data, allowing you to monitor their location with precision.
4. Geo-Fencing: Many 2G vehicle trackers with a magnetic body support geo-fencing functionality. This enables you to set up virtual boundaries or zones on a map and receive alerts if the tracked vehicle or asset enters or exits these predefined areas. Geo-fencing is useful for managing vehicle or asset movement, enhancing security, and ensuring compliance with designated areas.
5. Easy Portability: The magnetic mounting system allows you to easily move the tracker between different vehicles or assets as needed. This makes it ideal for applications where tracking requirements may change frequently or where temporary tracking is necessary.
6. Quick Installation and Removal: The magnetic body of the tracker simplifies the installation process. You can attach the tracker to a suitable metal surface within seconds, and removing it is just as easy. This saves time and effort compared to traditional installation methods.
7. Compact and Discreet Design: 2G vehicle trackers with a magnetic body are typically compact and discreet, making them less noticeable when installed on a vehicle or asset. This can be advantageous for applications where covert tracking or minimal visual impact is desired.

It is important to note that 2G networks are being phased out in some regions, and the availability of 2G coverage may vary. Before purchasing a 2G vehicle tracker, ensure that 2G network coverage is available in your area to ensure the tracker's functionality.

In summary, a 2G vehicle tracker with a magnetic body offers real-time tracking capabilities, accurate location data, and the convenience of quick and easy installation. The magnetic mounting system allows for flexibility and portability, making it suitable for temporary tracking or situations where permanent installation is not feasible.

The post Magnet – M appeared first on iTrack.

Here are some key features and benefits of a 2G vehicle tracker with a magnetic body:

1. Magnetic Mounting: The magnetic body of the tracker allows for quick and effortless installation on metallic surfaces, such as the body of a vehicle. The strong magnets securely hold the tracker in place, eliminating the need for screws, brackets, or other mounting hardware. This makes it convenient to attach and detach the tracker as needed.
2. Real-Time Tracking: Like any other 2G vehicle tracker, the tracker with a magnetic body provides real-time tracking capabilities. It enables you to monitor the location and movement of your vehicles or assets in real-time, providing you with up-to-date information about their whereabouts.
3. Location Accuracy: With the integration of GPS technology, the 2G vehicle tracker can accurately determine the precise geographical coordinates of the vehicle or asset. This ensures accurate and reliable tracking data, allowing you to monitor their location with precision.
4. Geo-Fencing: Many 2G vehicle trackers with a magnetic body support geo-fencing functionality. This enables you to set up virtual boundaries or zones on a map and receive alerts if the tracked vehicle or asset enters or exits these predefined areas. Geo-fencing is useful for managing vehicle or asset movement, enhancing security, and ensuring compliance with designated areas.
5. Easy Portability: The magnetic mounting system allows you to easily move the tracker between different vehicles or assets as needed. This makes it ideal for applications where tracking requirements may change frequently or where temporary tracking is necessary.
6. Quick Installation and Removal: The magnetic body of the tracker simplifies the installation process. You can attach the tracker to a suitable metal surface within seconds, and removing it is just as easy. This saves time and effort compared to traditional installation methods.
7. Compact and Discreet Design: 2G vehicle trackers with a magnetic body are typically compact and discreet, making them less noticeable when installed on a vehicle or asset. This can be advantageous for applications where covert tracking or minimal visual impact is desired.

It is important to note that 2G networks are being phased out in some regions, and the availability of 2G coverage may vary. Before purchasing a 2G vehicle tracker, ensure that 2G network coverage is available in your area to ensure the tracker's functionality.

In summary, a 2G vehicle tracker with a magnetic body offers real-time tracking capabilities, accurate location data, and the convenience of quick and easy installation. The magnetic mounting system allows for flexibility and portability, making it suitable for temporary tracking or situations where permanent installation is not feasible.

The post Magnet 7500 appeared first on iTrack.

Here are some key features and benefits of a 2G vehicle tracker with a magnetic body:

1. Magnetic Mounting: The magnetic body of the tracker allows for quick and effortless installation on metallic surfaces, such as the body of a vehicle. The strong magnets securely hold the tracker in place, eliminating the need for screws, brackets, or other mounting hardware. This makes it convenient to attach and detach the tracker as needed.
2. Real-Time Tracking: Like any other 2G vehicle tracker, the tracker with a magnetic body provides real-time tracking capabilities. It enables you to monitor the location and movement of your vehicles or assets in real-time, providing you with up-to-date information about their whereabouts.
3. Location Accuracy: With the integration of GPS technology, the 2G vehicle tracker can accurately determine the precise geographical coordinates of the vehicle or asset. This ensures accurate and reliable tracking data, allowing you to monitor their location with precision.
4. Geo-Fencing: Many 2G vehicle trackers with a magnetic body support geo-fencing functionality. This enables you to set up virtual boundaries or zones on a map and receive alerts if the tracked vehicle or asset enters or exits these predefined areas. Geo-fencing is useful for managing vehicle or asset movement, enhancing security, and ensuring compliance with designated areas.
5. Easy Portability: The magnetic mounting system allows you to easily move the tracker between different vehicles or assets as needed. This makes it ideal for applications where tracking requirements may change frequently or where temporary tracking is necessary.
6. Quick Installation and Removal: The magnetic body of the tracker simplifies the installation process. You can attach the tracker to a suitable metal surface within seconds, and removing it is just as easy. This saves time and effort compared to traditional installation methods.
7. Compact and Discreet Design: 2G vehicle trackers with a magnetic body are typically compact and discreet, making them less noticeable when installed on a vehicle or asset. This can be advantageous for applications where covert tracking or minimal visual impact is desired.

It is important to note that 2G networks are being phased out in some regions, and the availability of 2G coverage may vary. Before purchasing a 2G vehicle tracker, ensure that 2G network coverage is available in your area to ensure the tracker's functionality.

In summary, a 2G vehicle tracker with a magnetic body offers real-time tracking capabilities, accurate location data, and the convenience of quick and easy installation. The magnetic mounting system allows for flexibility and portability, making it suitable for temporary tracking or situations where permanent installation is not feasible.

The post Magnet Mini appeared first on iTrack.

The GPS component of the tracker utilizes a network of satellites to determine the precise geographical coordinates of the tracker. This information is then transmitted to the user or a designated monitoring platform via the 4G cellular network. The 4G network provides fast and reliable data transfer, enabling real-time tracking and monitoring capabilities.

The post 4G Tracker Regular appeared first on iTrack.

The post AIS 140 – 2G appeared first on iTrack.